Bolt

World’s Fastest Motion Control System

Super Fast Motion Control Camera System

The Bolt’s arm has super-fast acceleration, going from standstill to high speed and back in fractions of seconds. This gives it the ability to follow falling objects whilst capturing images in crisp focus which would be impossible by any other method.

Available both on track and on pedestal, the Bolt is the go-to rig for most high-speed work. On the track, it can get up to 6m/sec (about 13mph), and on pedestal, it can fit through standard-sized doorways and tuck into tight spots comfortably.

Reach

6.56 FT / 2 M

Set Up Time

45 MINS

Speed At Camera

1.64 ftps / 0.5 mps

Payload

55.11 LB / 25 KG

SPECIFICATIONS

Operating Envelope
Maximum Height8 ft2.45 m
Lowest position.0 ft.0m
Maximum reach (from rotate centre)4.9 ft1.5m
RIG DIMENSIONS
Bolt on Pedestal3 ft x 3 ft0.92 m x 0.92 m
Bolt on Track5 ft x 5 ft3.05 m x 0.98 m
Track Pallet10 ft x 3.2 ft3.1 m x 0.98 m
Accessory Kit3 ft x 4 ft0.92 m x 1.22 m
Workstation3 ft x 4 ft0.92 m x 1.22 m
Rig Performance
AxisRange of TravelMaximum Speeds
Rotate+/- 160 degrees200 degrees per second
Lift+/- 137 degrees200 degrees per second
Arm+/- 150 degrees255 degrees per second
Pan+/- 270 degrees315 degrees per second
Tilt+/- 120 degrees /-105 degrees350 degrees per second
Roll+/- 270 degrees870 degrees per second
PRACTICAL SHOOTING SPEEDS
MoveSpeed
1m vertical moveHalf a second
1m horizontal moveHalf a second
Complete 180 degree arc with a 75cm radius1.5 seconds
Complete 180 degree arc with a 45cm radius1 second
PRACTICAL SHOOTING SPEEDS
LBKg
Bolt robot arm551250
Bolt base440.9200
bolt wings x2132.2760
Counter weights if not screwed to the floor1322.77600
Total Bolt weight set up24471110
Power Supply Unit132.2760
Magliner and Flair unit154.370
Power Connection
Power requirementsRequires 3 x 400-415V, 32 amps, and 32 m/a rcd. Draws approx 3kva. ( Ask about possibility of single phase 32amp)